Specifications

Modular I/O Configuration Guide136
SETUP/ROUTING Page
This page configures the module’s audio bus routing.
Decoder Input
The decoder input can be set to:
external Input BNC
– or –
INT From C8000 System Bus.
Decoder
This displays the format of the incoming stream: Dolby E, Dolby D, PCM. The SETUP/ROUTING page above shows a Dolby E
stream containing two programs (5.1 + 2).
AUX Input
An AUX input is provided for a PCM signal that may incur Dolby decoding delay.
Delay
A delay can be applied to an independent digital audio signal (PCM) to compensate for upstream processing or for decoding delay.
To C8000 System Bus
Select this option to assign the outputs of the decoder to the frame’s audio busses (S1–S32/Off).
Output Mux
The signals to the audio busses may be multiplexed in 2ch or 8ch mode. In 8ch mode, only one bus selector is available for each
of the two eight-channel sections.
DE901 Web Configuration Setup/Routing page