Specifications

Chapter 11: Dolby D/E Modules 135
DEVICE Page
This page configures and displays device-specific information about the DE901
Device Name
This field displays the current name. Click CHANGE NAME to rename the device.
Restart Module
Clicking RESTART initiates a warm start.
Initialize and restore factory defaults
Clicking INITIALIZE restores factory default settings. The input bus assignment are set to S1–S4, the outputs are turned off and the
bus drivers are disabled.
Controller Version
This displays the module’s firmware version.
Dolby Firmware Version
This displays the version of the Dolby piggyback version.
Backup all settings to File
Clicking BACKUP stores all settings to file.
Restore all settings from File
Clicking RESTORE restores all settings from the selected file/destination.
DE901 Web Configuration Device page