Specifications

Modular I/O Configuration Guide126
DEVICE Page
The status area on the left shows the name of the active preset. When a preset parameter is changed, modified appears to the left
of the preset name until it is saved.
Device Name
This field displays current name. Click CHANGE NAME to rename the device.
Restart Module
Clicking RESTART initiates a warm start.
Initialize and restore factory defaults
Clicking INITIALIZE restores factory default settings. The input bus assignment are set to S1–S4, the outputs are turned off and the
bus drivers are disabled.
FIRMWARE
Controller: Displays the controller’s firmware version.
SDI: Displays the SDI firmware version.
Backup Settings and Presets to File
Clicking BACKUP stores all settings and presets to file.
Restore Settings and Presets from File
Clicking RESTORE restores all settings and presets from the selected file/destination.
HD944 Web Configuration Device page