Instruction manual

Euphonix Modular I/O Configuration Guide Product Data Sheets

2/2

Technical Specifications

dynamic range 110dB (RMS) digital output:

max. input level +20dBu resolution 24bit

THD+N <0.09% @ max. sample rate 32...96kHz

input level gain 0, +10…+65dB, in 1dB steps

equiv. Input noise 126,5dB (RMS) backplane connector:

@ 200 Ohm ref. to DIN41612 64pin, a+b, male

40dB gain power supply +5V DC

consumption appr. 1300 mA

dimensions 3RU, 4HP, 175mm dept

weight ~300g

frequency response 10Hz (-3dB)...20kHz (-0,5dB)

(FS=48kHz)

10Hz (-3dB)...40kHz (-0,5dB)

(FS=96kHz)

crosstalk >90dB (20kHz)

CMR >80dB (20kHz)

input impedance 9 kOhm, differential

RJ-45 connector 4,5-screen, 3-live, 6-return

Installation

Local Setup

CAN – ID: Rotary switch to set the module ID (0…F)

INIT: Initialization the card, all user settings will be replaced by factory default!!

AD914 4ch Micro

hone In