Instruction manual

Euphonix Modular I/O Configuration Guide Product Description
13
• <56 out>
• <64 out>
96k Operation:
In frames operating at 96k sample rate, only the first 28
signals in a MADI stream are available. In these cases, <32
in, 32 out> working mode yields the best signal efficiency
with 28 MADI inputs and 28 MADI outputs at 96k.
Note: When used as the master sync source, the
MM934/MM934opt MADI In/Out should only be
removed from a frame after the frame has been
powered down. Possible damage may occur to some
I/O modules if the master sync source is removed
from a live frame.
Connections, Power Consumption, Width, Weight
MADI I/O (BNC x2). Multimode fiber: 62.5/125µm, 1310nm,
one fiber strand per direction (SC x2) in MM934opt, ~350
mA (~500mA for MM934opt), 4HP. ~150g.
1.2.2 MM935 MADI In/Out
General Description
The MM935 contains a single coax MADI I/O. The module
features a master sync mode that allows it to derive the
master sync source for the rack from its MADI input. Certain
settings are done from on-board switches such as device ID.
Buss configuration is accomplished using a flexible
crosspoint matrix configured via web-browser interface.
Note: When used as the master sync source, the
MM935 MADI In/Out should only be removed from a
frame after the frame has been powered down.
Possible damage may occur to some I/O modules if
the master sync source is removed from a live frame.
Connections, Power Consumption, Width, Weight
MADI I/O (BNC x2), ~350 mA, 4HP. ~150g.
1.2.3 MM936 MADI In/Out