Instruction manual

Euphonix Modular I/O Configuration Guide Product Data Sheets
110
2/4
Technical Specifications
VIDEO :
standard: SMPTE 299M 1,485 Gbit HD-SDI
SMPTE 272 M–A, C 270 Mbit SD-SDI
connection: BNC, 75 Ohm, coaxial (SDI through: active loop, reclocked)
signal level: 800mV ±10%
equalisation: 130m (Belden 1694A, 1.485GHz)
300m (Belden 8281 , 270 MHz)
return loss: >15 dB (1.485 GHz)
supported video standards:
HD 720/60 SMPTE 296M HD 1080/25 SMPTE 274M
HD 720/50 SMPTE 296M HD 1080/24 SMPTE 274M
HD 720/30 SMPTE 296M HD 1080/50 SMPTE 295M
HD 720/25 SMPTE 296M HD 1035/60 SMPTE 260M
HD 720/24 SMPTE 296M
HD 1080/60 SMPTE 274M SD 525/59.94 SMPTE 125M
HD 1080/50 SMPTE 274M SD 625/50 SMPTE 125M
HD 1080/30 SMPTE 274M
all HD-standards are supported also with their 1/1001-frame-rates
AUDIO :
audio data format: 24 Bit, transparent for C-Bit and U-Bit according to AES3
audio sample rate: 48 kHz synchronous to video-carrier
latency (deembedder + embedder):
HD: <800µsec
SD : < 2,6 msec
audio delay : 0...240 msec
sample rate converter: 24bit, THD < 140dB
GENERAL :
backplane connector: ref. to DIN41612, 64pin, a+b, male
power supply: +5V DC
consumption: approx. 1.000 mA
dimension: 3RU, 4HP, 175mm depth (EUROPA size pcb)
weight: ~300g
temperature: 10°C to 40°C
humidity: 90%, non condensing
HD943 8ch HD/SD De/Embedder