Instruction manual

Euphonix Modular I/O Configuration Guide Product Data Sheets
102
2/4
Technical Specifications
SDI interface with Audio Embedder/Deembedder function
standard: SMPTE 272 M - AB, 270Mb/s, 525/625 component
connection: BNC, 75 Ohm, coaxial (SDI through: active loop, reclocked)
signal level: 800mV ±10%
equalisation: appr. to 180m (Belden)
audio data format: 20bit
backplane connector: ref. to DIN41612, 64pin, a+b, male
power supply: +5V DC
consumption: appr. 800 mA
dimensions : 3RU, 4HP, 175mm depth
weight : ~300g
Installation
DUAL
-both DUAL switches should be OFF all the time
PACK
-generates a new audio frame structure, deleting all former existing embedded
audio
-embeds selected TX group as the first audio group within SDI stream (TX group
typically set to Group 1)
-necessary if no audio was embedded before
SD941 4ch SD De/Embedder
SDI-
Interface
DUAL
EXCHNG
SWAP1
SWAP0
RX-GR1
RX-GR0
DUAL
PACK
CASCADE
TX-GR0
TX-GR1
RECEIVER TRANSMITTER