Instruction manual

System 5 Digital Audio Mixing System Operation Manual

Chapter 2: New Features in eMix Version 2.6

This section lists new and updated features in the eMix version 2.6 software. Cross-ref-

erences link to that feature’s discussion in the manual.

Conform

• Insert, Move and Delete operations have been changed so they operate prop-

erly on a mix containing virgin territory (no previous automation).

• It is now possible to Copy automation moves to a new location.

• Entries can now be edited after they are entered in any field in the list.

• All standard SMPTE frame rates (35 mm Feet+Frames and 16 mm Half-

Feet+Frames) can now be entered.

• The entries in the list are now processed in the order entered, not in the order

of their timecode.

• New Hot keys have been added to speed data entry and navigation.

(See Automation Conform on page 196).

Auto Match

Auto Match is a new automation function.

(See Auto Match on page 191).

Fill Start and Fill End

Fill Start and Fill End now latch on if pressed twice.

(See Section 13.8.2 - Fill Start and Fill End on page 186.)

• All four EQ bands now have a range of 20 Hz – 20 kHz. The default values did

not change. Older titles still load with their previous frequency values un-

changed. The frequency control range is covered by approximately 2 full knob

rotations to maintain the current resolution.

• EQ gain control is now ±24 dB. The resolution remains 1/8 dB increments.

(See Equalizers and Filters on page 117.)