Instruction manual

System 5 Digital Audio Mixing System Operation Manual CM403 Film/Post Module
210
14.3 Joystick Module
Two joysticks are housed in a full-width panel mounted in a CM403 module.
Figure 14-10 Joystick Panel controls
14.3.1 Assigning a Channel to a Joystick
Assign a channel to the joystick with the same key strokes used to assign a channel to
a strip.
100%
C1
Pan
L/R
Snd
F/B
Solo
Pan Engage
Surround Engage
Activates the
channel is not being
controlled
Turns joystick
motor on and off
Joystick select/punch
key
Joystick Wave key is
used with Select/Punch
key to set automation
mode, link to a strip, or
lock from layouts
Joystick position matrix
is 19 x 19 LEDs. A
single green LED
indicates the current
position and a diamond
represents the
Select key
Channel
Display
Solo Channel
joystick – when off,
underlying automation.