Instruction manual

System 5 Digital Audio Mixing System Operation Manual CM403 Film/Post Module
205
14.2.2 The Monitor Utility Section
Figure 14-4 Monitor Utility Section
Most of these functions already exist on the current CM401 (see Section 5.1 Monitor-
ing). The only new feature is Spkr Asgn, (Speaker Re-Assign).
Ext's
Cut
Dim
Alt 1
Spkrs
Main
Spkrs
Alt 2
Spkrs
Monitor
Insert
Spkr
Asgn
Fold
Down
Solo
Ctrl
Rec's
Dia
Mus
FX
Tal k
Speaker Cut and Solo -
Direct access to the speaker
On keys. User can also solo
a speaker by selecting the
Solo key first. Turning solo
off returns the speakers to
their previous state.
The FoldDown switch brings up
the monitor modes on the
displays to the right,
(i.e., mono, stereo, 5.1 etc.)
Monitor Source - Rec's brings up
the Bus Sections (Recorders) onto
the displays to the right where the
user can select them. This is the
same as the On keys on the
PEC/DIR panel.
Ext's will display the Externals
Spkr Asgn - allows user to
reassign a bus to a different
speaker. By default the system
automatically assigns the busses
to the correct speaker based on
the format of the bus.
Monitor Insert - toggles
the main monitor bus
inserts in and out.
Main or Alt monitor
selection and monitor
Cut and Dim.
(same a CM401)
Scroll keys - scrolls the displays to allow access to
more than 8 bus-sections or externals.
Solo Control - Selecting Solo
Control brings up selection of
Summing, Intercanceling, or
Momentary for Stems. Also alows
Solo Safe to be set by selecting
the Exp/Sel switch.
Solo - allows user to
solo externals and monitor
sources.