Instruction manual

System 5 Digital Audio Mixing System Operation Manual Dynamic Automation
199
Storing and Recalling Notes
The tabs above the notes area are for global operations and file maintenance:
• Clear Notes: removes all note entries from the current Conform screen;
The notes are not automatically cleared after a Conform operation.
• Store Notes: stores the current notes using a standard Windows file saving
dialog box;
• Recall Notes: recalls a notes file into the current screen using a standard
Windows file opening dialog box.
Executing the Conform Operation
After all notes have been entered and verified, press the Conform button at the bottom-
center of the screen. The Execute Conform dialog box appears (Figure 13-17) to confirm
you wish to proceed. This realigns the automation with the edited film.
Figure 13-17 Execute Conform dialog box
Each Conform operation adds a new pass to the Pass Tree. To undo the Conform opera-
tion, return to the pass prior to the pass just created (Section 13.13.2 - Mix Passes).
After the Conform operation, the notes remain displayed in the Conform screen. Be
careful to avoid clicking the Conform button again as this will mis-align the data. If the
button is clicked twice by mistake, undo the second Conform operation.