User`s guide

Preliminary Manual RELAY BOX - RB132/GP132 USER’S GUIDE
EUPHONIX INC - RB132/GP132 p6 Wednesday, August 26
th
, 2000
SETTING UP THE UNIT VER 0.4H
FIRMWARE
The GP132 has a three way toggle switch on the right of the front panel.
It has three states :
q Relays only (UP) Displays the state of the RELAY CLOSURES (OUTPUTS) and allows
control of the RELAY CLOSURES (OUTPUTS) manually from the front panel.
q Relays + Tallies (DOWN) Displays the state of the TALLY OPTO' (INPUTS) and allows
setting of the RELAY CLOSURES (OUTPUTS) manually from the front panel.
q Setup (CENTRE) Displays the operational modes of the GP132 and
allow altering of the operational parameters.
1. MIDI PRESS Select MIDI. This de-selects both Sony 9pin & EsBus protocols.
DOUBLE PRESS Display & Set MIDI Channel number.
2. MMC PRESS Enable / disable MIDI MACHINE CONTROL. If all other MIDI modes are
disabled at the time that MMC is enabled, then the RELAY and TALLY maps
will be fully set to MMC.
DOUBLE PRESS Display & Set RELAY (OUTPUT) Map for MMC.
3. N.O. PRESS Enable / disable MIDI NOTE ON / OFF. . If all other MIDI modes are
disabled at the time that NOTE ON/OFF is enabled, then the RELAY and TALLY
maps will be fully set to NOTE ON/OFF.
DOUBLE PRESS Display & Set RELAY (OUTPUT) Map for NOTE ON/OFF.
4. C.C. PRESS Enable / disable MIDI CONTINUOUS CONTROLLERS. . If all other MIDI
modes are disabled at the time that CONTINUOUS CONTROLLERS is enabled,
then the RELAY and TALLY maps will be fully set CONTINUOUS CONTROLLERS .
DOUBLE PRESS Display & Set RELAY (OUTPUT) Map for CONTINUOUS CONTROLLERS.
5. SysX PRESS Enable / disable MIDI SYSTEM EXCLUSIVE. . If all other MIDI modes
are disabled at the time that SYSTEM EXCLUSIVE is enabled, then the RELAY
and TALLY maps will be fully set to SYSTEM EXCLUSIVE. (Currently this mode will work as
an MX464 simulation and ignore all mapping!! ).
DOUBLE PRESS Display & Set RELAY (OUTPUT) Map for SYSTEM EXCLUSIVE.
6. P2 PRESS Select Sony 9pin protocol (P2) (not available). This de-selects MIDI.
7. EsBus PRESS Select EsBus protocol (EsBus) (not available). This de-selects MIDI.
8. EAddr PRESS no function.
9. . PRESS no function.
DOUBLE PRESS Display & Set TALLY OPTO' (INPUT) Map for MIDI MACHINE CONTROL.