User`s guide

Preliminary Manual RELAY BOX - RB132/GP132 USER’S GUIDE
EUPHONIX INC - RB132/GP132 p14 Wednesday, August 26
th
, 2000
Column names and their functions are as follows:
• RELAY: The relay number being addressed.
• INIT: The state to which a relay is set when initialized or reset.
• TRIGGER: The fader object controlling the relay .
• STATE: The “active” position of the relay when triggered by the upward
movement of the fader object.
• COMMENT: The name of the relay assigned by either the console or the
user.
The DSC [+] / [-] keys are used to move vertically within columns to
select/address any GPI relay . The DSC [left arrow] and [right arrow] keys
move the selection horizontally from column to column.
To assign a fader object to a relay , select the relay and press a fader object's
attention key:
The selected fader object appears in the TRIGGER field. To clear any fader
object designation, press [Clr] and then [F3] (Yes).
As you may have noticed, it is not necessary to first select the TRIGGER field
in or der to assign the fader object. The INIT and STATE fields operate in a
similar manner when pressing F2 and F3.