Installation manual

Section 1: Automation EQ

1 - 2 Euphonix CS3000/2000 MixView 3.0 Software Supplement

Additional EQ

Automation

Features

Automation Viewer

Monitor Before Record

(MBR)

F3F1 F2 F4

Pass 1 Undo? Redo?

Clr? Pack? Edit Util

Zoom Full Show ZFac

View Join Group Trim

Set:EQ1 LG / lG / hG / HG

By using the Pass Control screen, the A, B, C and D rows are assignable, via

menu selection, to display several EQ automation parameters and their

automation moves. The display is similar in style to auxes, pans and faders.

They can also show combinations of EQ and Aux moves if desired.

Press [Pass Ctrl] to view the Pass Control screen. Press [F4] (down arrows),

[F4] (Util), [F1] (View) and then [F3] (Show):

In this menu, each row can be configured individually or all four rows can be

configured simultaneously by recalling “Sets”.

In Set mode (Set:EQ1 in our example), [F3]/[F4], the [+]/[-] keys and the

SpinKnob select the set for the four rows.

Remember, a “Set” is a preset that

configures all four rows

. Press [F1] to toggle between Row and Set modes:

In Row mode, [F2] selects the row to be configured. [F3]/[F4], the [+]/[-] keys

F3F1 F2 F4

Row 1: EQ1 lG

and the SpinKnob allow selection of the parameter to be viewed in the row.

The Monitor Before Record (MBR) automation feature applies to automated EQ

(see the Automation Editing section later in this document for a discussion of

MBR).

EQ moves are in Absolute only and the Win, Wout and Wthru applies to EQ.