Installation manual

Section 10: MX464

Euphonix CS3000/2000 MixView 3.0 Software Supplement 10 - 71

Column names and their functions are as follows:

• RELAY: The r elay number being addr essed.

• INIT: The state to which a r elay is set when initialized or r eset.

• TRIGGER: The fader object contr olling the r elay.

• STATE: The “active” position of the r elay when trigger ed by the upwar d

movement of the fader object.

• COMMENT: The name of the r elay assigned by either the console or the

user.

The DSC [ +]/[-] keys are used to move vertically within columns to

select/addr ess any GPI r elay. The DSC [ left arrow] and [ right arrow] keys

move the selection horizontally from column to column.

To assign a fader object to a r elay, select the r elay and pr ess a fader object's

attention key:

The selected fader object appears in the TRIGGER field. T o clear any fader

object designation, pr ess [ Clr] and then [ F3] (Yes).

As you may have noticed, it is not necessary to first select the TRIGGER field

in or der to assign the fader object. The INIT and ST ATE fields operate in a

similar manner when pressing F2 and F3.

As with MIDI and Fader -Linking scr eens, the [ Enter] key duplicates the

currently selected GPI object allowing it to be controlled from multiple faders.

DIR