Installation manual

Section 8: MIDI Remote Control
Euphonix CS3000/2000 MixView 3.0 Software Supplement 8 - 61
Descriptive names may be assigned to any MIDI channels by pressing [F1] on
the QWERTY keyboard. The Assignable key display shows up to eight charac-
ters while the SmartDisplay menu shows the name’s first three characters:
Linking Presets to
Console
SnapShots
Sending Multiple MIDI
Program Changes
Assigning MIDI channel
Names
F3F1 F2 F4
After entering/modifying a MIDI preset, you can choose to send all of its
assigned program changes at once or each program change individually. To
send all MIDI program changes at once, press [F4] (RCL). To send individual
MIDI channel changes, press the left Assignable key adjacent to the MIDI
channel you wish to send.
Should you ever want to prevent the console from sending all configured
program changes, you can disable all outgoing console program change
activity. From the top-level menu press [F3], [F4] and then [F3]:
1
2
9
10
Reverb
Ch 2
PRG 31
— — —
F3F1 F2 F4 F3F1 F2 F4
F3F1 F2 F4 F3F1 F2 F4
Setup Snap System Grps
File F-Link GPI MIDI Enabled Clear Name
In Out Preset SS->SS
You can now disable all console MIDI program changes by pressing [F1]. [F3]
clears all MIDI assignments for the currently selected preset and [F4] allows
another way to name the currently selected MIDI channel.
SnapShot linking allows any configured MIDI preset to be recalled using the
console SnapShot recall system. This is a powerful feature allowing automa-
tion of an entire MIDI studio.
To link any of the fifty (50) MIDI presets to any of the fifty (50) console
SnapShots, press the DSC [SnapShot] key and select the Snapshot you want
to link to. Next, press the DSC [Studio] key to display the MIDI preset menu.
Once all parameters of the desired preset have been selected (midi preset,
MP01 01:Rev 31 RCL