Installation manual

Section 7: Channel Function Enhancements

Euphonix CS3000/2000 MixView 3.0 Software Supplement 7 - 53

There are some additional mono-in variations which bear mentioning at this

time. From the Aux Status menu, press [F3] to lock the pan control signal at

the center:

F3F1 F2 F4

An additional mode is accessible from this Level/Pan Mode menu. This Mono

mode sums all inputs and outputs, disables the upper control of the A/B and

C/D aux sends and is included here only for backward title compatibility with

earlier versions of software.

Press [F2] to select Mono mode:

F3F1 F2 F4

In this exercise, we will setup channel 16’s aux send A & B as a stereo in/

stereo out level and pan feed.

Press channel 16’s aux A/B block attention key to display the Aux Status menu

and confirm that console attention is directed to aux send A:

F3F1 F2 F4

Press the [*ST] key followed by [F3] (Yes) to change to stereo linked mode:

F3F1 F2 F4

The most commonly used stereo mode is Stereo Balance mode.

Exercise 4

Stereo Balance mode

Mono Pan Center

Locked Mode

Mono mode

SIDE NOTE:

This mode is rarely used and

should not be confused with the

similarly displayed Mono

Independent mode.

16AB-> MnPan Ctr Ind?

16AB-> Mono - - - Ind?

16A-> ON pre

AB Stereo Aux ? Yes [No]

16AB->

Stereo Bal Ind?