Installation manual

Section 7: Channel Function Enhancements
7 - 52 Euphonix CS3000/2000 MixView 3.0 Software Supplement
789
456
123
M1 M2 DIR
L1 L2 ST1
L3 L4 ST2
Press the [*ST] key followed by [F3] (Yes) to change to stereo linked mode:
F3F1 F2 F4
F3F1 F2 F4
Press the [*ST] key again to select MonoPan mode:
F3F1 F2 F4
Press the DSC [L4] key to directly assign the aux source routing:
F3F1 F2 F4
Press the DSC keypad [1] & [2] keys to directly assign the aux send to aux bus
1 & 2:
F3F1 F2 F4
Whenever a stereo linked mode is set, the aux A (C) pot becomes the pan
control and the aux B (D) pot becomes the level control. The aux send is now
ready for use.
This concludes Exercise 3.
Remember that direct access to any aux mute and pre/Post parameters is
always available from the top level Aux menu, simply by pressing any aux
send attention key.
AB Stereo Aux ? Yes [No]
16AB->
*
Stereo Bal Ind?
16AB-> MnPan Ctr Ind?
16AB-> BUS 1 2
16AB-> L4<-p. .