Installation manual

Section 4: The Audio Cube
Euphonix CS3000/2000 MixView 3.0 Software Supplement 4 - 21
F3F1 F2 F4 F3F1 F2 F4
F3F1 F2 F4
Bus 1 -> OFF
Standard Special
I/O Bus Assign
To view the Cube Input Assignment Templates, press the [Bus Master] DSC
key:
The diagram above depicts a 56 fader M system. M systems typically send
both upper and lower faders to the Cube. Since there are a maximum number
of 48 Cube inputs, the last 4 upper and 4 lower faders will not reach the Cube.
View the Template
M-56 Cube Input Assignment
Template
“Standard” Cube Input
Assignment Template
F3F1 F2 F4
Use [F2] to select the system type and [F3] to select the system size. Then
press [F4] to confirm.
Cube cabling designs and templates exist for every available factory standard
console - Cube combination, as well as most custom configurations. What you
actually see in the template will depend on the type of system, the number of
console audio faders and Cube inputs.
It would be difficult to show templates for every style and size of system here
but we will review some of the more common ones.
Sys: F 56 [Yes]
Press [F1] (Standard):