Installation manual

Section 4: The Audio Cube
4 - 18 Euphonix CS3000/2000 MixView 3.0 Software Supplement
Once the Hyper-Surround panners are configured, the are accessed by pressing
the DSC [Pan Assign] key. While in the Pan menu and screen, calling atten-
tion to any fader block will access the panners available to that fader.
Some Audio Cube “pre-configuration” is required before the Aux and Hyper
Surround screens appear as they do in the diagrams above. Typically, though,
once these configurations are done, they rarely need to be revisited.
This section deals mainly with hardware overview and the Audio Cube pre-
configurations and Cube aux sends. The following section explains in detail
how Hyper Surround panners are created and used.
Hyper-Surround
Panning
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
i
d t
DynEQ
Pg 1 Pg 2 Pg 3 Pg 4
Aux Pan
Assign
Bus
Master
Chan
List
Bus Master
level display
for 5.1 panner
Panner name
Active panner
meters & position
All panner
controls displayed
(Page 1)
DSC Screen Display
DSC Assignable Rotary Controls
Position
indicator