Installation manual

Section 3: Automation Utilities

Euphonix CS3000/2000 MixView 3.0 Software Supplement 3 - 7

SECTION 3 : AUTOMATION UTILITIES

he Punch menu allows you to accomplish three useful automation tasks:

1. Establish an automation “Punch Group” to allow a collection of objects

to be punched in with a single DSC keystroke.

2. Disable Write In, Write Out and Write Through at the end of each

automation pass via a menu preference.

3. Allow the punch out “Filter” to follow the Object select keys via a

menu preference.

Make sure that the DSC [Mix On] key is lit and press the DSC [Pnch] key:

F3F1 F2 F4

[F1] (Touch) and [F2] (Rel) correspond to the identical settings in the Moving

fader menu. Changes in either menu are reflected in the other.

Press [F3] (Tplt) to view the Punch menu and screen template:

F3F1 F2 F4

The Punch template screen allows you to select any combination of mute,

fader, pan, EQ1, EQ2, Aux A, B, C, or D objects on any channel(s). All armed

objects can then be punched-in by pressing the [*ST] key. While the punch

Punch Menu

Touch Rel Tplt Setup

You can check the status of the

Touch and Release settings

without a title loaded by

accessing the Moving Faders

menu. See the section on Moving

Faders for more details.

SIDE NOTE:

Punch -> Select objects

Punch Menu