DF66 Super Core Installation Manual Document Revision: A Part Number: 840-11252-01 Release Date: May 2010 Euphonix is Avid. Learn more at www.avid.
Regulatory and Safety Notices FCC Notice Part 15 of the Federal Communication Commission Rules and Regulations has established Radio Frequency (RF) emission limits to provide an interference free radio frequency spectrum. Many electronic devices produce RF energy incidental to their intended purpose. These rules place electronic equipment into two classes, A and B, depending on the intended use. Class A devices are those that may be expected to be installed in a business or commercial environment.
Modifications The FCC requires the user to be notified that any changes or modifications made to Avid hardware that are not expressly approved by Avid Technology may void the user’s authority to operate the equipment. Cables Connections to Avid hardware must be made with shielded cables with metallic RFI/EMI connector hoods in order to maintain compliance with FCC Rules and Regulations. PRODUCTS WITH MULTIPLE POWER INPUTS: WARNING: Each power input is intended to be connected to a separate branch circuit.
European Union Declaration of Conformity Declaration of conformity Konformitätserklärung Déclaration de conformité Declaración de Confomidad Verklaring de overeenstemming Dichiarazione di conformità We/Wir/ Nous/WIJ/Noi: Avid Technology 1925 Andover Street Tewksbury, MA, 01876 USA European Contact: Nearest Avid Sales and Service Office or Avid Technology International B.V.
Product Name(s) : Super Core Model Number(s): DF66 Product Options: This declaration covers all options for the above product(s). to which this declaration relates is in conformity with the following standard(s) or other normative documents. auf das sich diese Erklärung bezieht, mit der/den folgenden Norm(en) oder Richtlinie(n) übereinstimmt. auquel se réfère cette déclaration est conforme à la (aux) norme(s) ou au(x) document(s) normatif(s).
LED Safety Notices Avid hardware might contain LED or Laser devices for communication use. These devices are compliant with the requirements for Class 1 LED and Laser Products and are safe in the intended use. In normal operation the output of these laser devices does not exceed the exposure limit of the eye and cannot cause harm. Standard to which conformity is declared: (IEC 60825-1) Optical connections are located on the rear panel and are typically labeled “Optical” or “SPDIF/ADAT.
Disposal of Waste Equipment by Users in the European Union Rack-mount Requirements The following rack-mount requirements are listed below: • Elevated Operating Ambient — If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment might be greater than room ambient. Therefore, consider installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer.
Lithium Battery Replacement If a battery is supplied in this Avid product it must only be replaced by qualified personnel. Contact Avid Customer Support for assistance. WARNING Danger of explosion if battery is incorrectly replaced. Replace with only the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. ADVARSEL! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering.
Overview The DF66 is an audio DSP core for the S5 and MaxAir families It is available with between 1 and 6 x 120Mhz DSP cards Up to 334 channels at 48 KHz and 176 channels at 96 KHz Models with bus processing available (including limiter)(lower channel counts) Up to 24 MADI ins and outs fully routable 4U, chassis inc. Digital Pilot. Redundant PSU’s Up to 48 Mix busses Can be used in a full hardware redundancy system Front Panel Power Switch and Status Indicators: See Status Module below.
Status Module Power Switch: Turns the unit on or off. System Reset Switch: Forces a manual reset of the DF66. Alarm Cancel Switch: Cancels the audible hardware fault alarm. LED Status Indicators: Indicates the status of the power supply, cooling fans, temperature, and file system activity. Healthy status is indicated with a green light, faults are indicated with a red light. USB Ports: Connect a USB storage device to update software (see SP662 DSP Card Firmware on page 15). Euphonix is Avid.
Connections Rear Panel AES In (3-pin Lemo Female or BNC): The DF66 clocks to the signal at this port when the sync source is set to AES Sync. Connect this port to a digital sync reference. Word In (BNC): The DF66 clocks to the signal at this port when the sync source is set to Word Clock. Connect this port to a digital sync reference. Word Out (BNC): This signal is active regardless of selected sync source. Euphonix is Avid. Learn more at www.avid.
Locked LED: Indicates that the DF66 is receiving from and locked to the selected sync source. This LED must be lit for proper DF66 audio operation. MADI In Ports: Digital audio signal input. Each port can receive 56 or 64 audio channels at sample rates up to 48 kHz, or 28 or 31 channels at 96 kHz. MADI Out Ports: Digital audio signal output. Each port can transmit 56 or 64 channels of audio at sample rates up to 48 kHz, or 28 or 31 channels at 96 kHz.
More information Please check the website www.euphonix.com for the Service manual and Operational Manual Specifications Power Requirements Power Consumption Tempreture of Operation Dimensions Weight Heat Dissipation DF66 Technical Specification 100-240 VAC; 50 or 60 Hz (Auto-ranging) 8-4 A Per Input 5-35 ºC H 177mm W 482mm L 482mm 20kg 1025BTU/hr Euphonix is Avid. Learn more at www.avid.
