Specifications

Rear PanelPC253I Interface Pilot

Serial Port (9 Pin D sub) A serial device can be connected here.

Parallel Port (25 pin Dsub) A printer or other parallel port device can connected here.

TCC Main Port (62 pin Dsub) Connect TTC breakout cable here.

TCC Extension Port (62 pin Dsub) Connect second TTC breakout cable here if more than 3 Mic-Line

interfaces are used..

USB Port (USB) Universal Serial Bus port. A USB device can be connected here.

Video Connector (15 Pin D sub) The video monitor connection is made at this port.

Pilot ID Setting (Rotary switch) Use this switch to assign Pilot ID numbers.

Network Port (RJ45) A EuCon Network connection is made here..

Keyboard (PS2) Connect keyboard cable here.

Trackball (PS2) Connect trackball cable here.

Power Connector (IEC) The IEC power connector accepts standard IEC power cords. A switching power

supplied is used so voltages from 110volts to 240 volts, 50 or 60 cycle, can be input.

PS2 KEYBOARD

PARALLEL

VGA

USB

SC253i

SERIAL 2

SERIAL 1

PILOT ID

PS2 MOUSE

Parallel Port

Pilot ID Setting

TCC Main Port

TCC Extension

Port

Power

Connector

Network

Port

Video

Keyboard

Trackball USB Port Serial Port