Specifications

Studio & Pilot Computers Manual Page 11 Version 1.01 ©1999 Euphonix Inc.
Rear Panel SC261 Studio Computer
Video Connector (15 Pin D sub) The video monitor connection is made at this port.
Parallel Port (25 pin Dsub) A printer or other parallel port device can connected here.
Keyboard (PS2) Connect keyboard cable here.
Trackball (PS2) Connect trackball cable here.
USB Port (USB) Universal serial Bus port. A USB device can be connected here.
Network Ports (RJ45) A Local Area Network (LAN) can be connected at this port to give the Studio
computer access to networked resources including Internet access if your facility is so
equipped.
SCSI (68 pin D-sub female) This connection is not currently used.
Power Connector (IEC) The IEC power connector accepts standard IEC power cords. A switching power
supplied is used so voltages from 110volts to 240 volts, 50 or 60 cycle, can be input.
|O|O|
L
A
N
2
L
A
N
3
PARALLEL
SC261
|O|O|
Unused
Network
Port
Network
Port
Video
Parallel
Port
Keyboard
Trackball
SCSI – Not
used
USB Port
Serial Ports
Do not use
Power
Connector