Specifications

ManualsBrandsEuphonix ManualsComputer equipmentDF64 Digital Frame

Studio & Pilot Computers Manual

Version 1.0

Part# 840-07590-01

Publish date: August 1999

Euphonix Inc. 220 Portage Avenue Palo Alto , CA 94306

Tel: (650)855-0400 Fax: (650) 855-0410 Web Page: www.euphonix.com

In the interest of continued product development, Euphonix reserves the right to make improvements in this manual and the

product it describes at any time, without notice or obligation.

System 5, S-5, PatchNet, eMix, EuCon, R-1, Studio Hub, , Digital Studio Controller, DSC, CleaR, GainBall, SnapShot,

SnapShot Automation, SnapShot Recall and Total Automation are trademarks of Euphonix Inc.

261

STUDIO COMPUTER

RESET

POWER GOOD

DISK ACCESS

SCSI BUSY

LAN 1 ACTIVE

LAN 2 ACTIVE

RS-422 DATA

Summary of content (14 pages)

PAGE 1
STUDIO COMPUTER POWER GOOD DISK ACCESS SCSI BUSY LAN 1 ACTIVE LAN 2 ACTIVE RS-422 DATA RS-422 DATA RESET Studio & Pilot Computers Manual Version 1.0 Part# 840-07590-01 Publish date: August 1999 Euphonix Inc. 220 Portage Avenue Palo Alto , CA 94306 Tel: (650)855-0400 Fax: (650) 855-0410 Web Page: www.euphonix.com In the interest of continued product development, Euphonix reserves the right to make improvements in this manual and the product it describes at any time, without notice or obligation.
PAGE 3
TABLE OF CONTENTS Box Inventory...........................................................................................................................4 Safety and Precautions .........................................................................................................4 System Setup.............................................................................................................................5 Power On Sequence .....................................................................
PAGE 4
Box Inventory The SC261 System Computer is packaged as follows: Description SC261 System PC Package SC261 package Pilot Computers manual Part # 956-06668-01 936-07369-01 840-07590-01 Qty 1 1 1 The PC253d Digital Pilot is packaged as follows: Description PC253d Digital Pilot Package PC253d package Pilot Computers manual Part # 956-06647-01 936-07370-01 840-07590-01 Qty 1 1 1 The PC253i Interface Pilot is packaged as follows: Description PC253i Interface Pilot Package PC253i package Pilot Computers manu
PAGE 5
9) 10) 11) 12) 13) Servicing – Do not attempt to service the Studio & Pilot computers beyond those means described in this operation manual. All other servicing should be referred to the Euphonix Tech Support department. Fuse replacement – To prevent electric shock and avoid risk of fire, replace fuse only with the same type and rating.
PAGE 6
Digital Pilot 1) 2) 3) Attach the RJ45 network cable connector to the port labeled LAN1. Attach the IEEE1394 cable to one of the ports marked IEEE1394. Attach the other end of this cable to the FC631 card at one of the ports labeled FIREWIRE on the corresponding DF64 Digital Frame. Attach the provided IEC compatible power cable to the IEC inlet. Interface Pilot 1) 2) 3) 4) 5) 6) Attach the RJ45 network cable connector to the port labeled LAN1.
PAGE 7
CE The Studio & Pilot computers are fully CE compliant. Documentation is available from the factory. Studio & Pilot Computers Manual Page 7 Version 1.01 ©1999 Euphonix Inc.
PAGE 8
Component Overview Functional Description System 5 includes three types of rack mount computers that manage communications among several of the System 5 sub components. The three types are designated Studio Computer (SC261), Digital Pilot (PC253i), and Interface Pilot (PC253d). Each type has a specific configuration and function within System 5. All are interconnected on a 100T full duplex network via the EuCon Network and Hub.
PAGE 9
Physical Specifications Front Panel STUDIO COMPUTER POWER GOOD DISK ACCESS SCSI BUSY LAN 1 ACTIVE LAN 2 ACTIVE RS-422 DATA RS-422 DATA SC RESET 261 DIGITAL PILOT COMPUTER POWER GOOD PC 253d RESET INTERFACE PILOT COMPUTER PC 253i RESET Front Panel Features Power Switch On/Off button powers up the unit. 24X CD ROM Drive(SC261) For upgrading system software. 3.5” Floppy Drive For upgrading system software, back up of Title files, or other system housekeeping duties.
PAGE 10
RS-422 Data LED (SC261) Indicates activity on the second RS-422 serial port. Reset Button Can be used for a ‘warm’ reboot of computer. This button is recessed into the front panel so it will not be accidentally pressed. Dimensions and Weight Height: Width: Depth: Weight: Studio & Pilot Computers Manual 3.5 inches 19 inches 18 inches 25 lbs Page 10 Version 1.01 ©1999 Euphonix Inc.
PAGE 11
Rear Panel SC261 Studio Computer Network Port SCSI – Not used Parallel Port L A N 2 SC261 L A N 3 PARALLEL |O|O| |O|O| Power Connector Do not use USB Port Unused Network Port Keyboard Trackball Video Serial Ports Video Connector (15 Pin D sub) The video monitor connection is made at this port. Parallel Port (25 pin Dsub) A printer or other parallel port device can connected here. Keyboard (PS2) Connect keyboard cable here. Trackball (PS2) Connect trackball cable here.
PAGE 12
Rear Panel PC253d Digital Pilot IEEE1394 Ports Parallel Port Pilot ID Setting PARALLEL SC253d SERIAL 1 SERIAL 2 PILOT ID PS2 MOUSE USB VGA PS2 KEYBOARD Power Connector Trackball Keyboard Network Port USB Port Serial Port Video Serial Port (9 Pin D sub) A serial device can be connected here. Parallel Port (25 pin Dsub) A printer or other parallel port device can connected here. IEEE1394 Ports(3) (62 pin Dsub) Connect one port to IEEE1394 connector on FC631 card in DF64.
PAGE 13
Rear PanelPC253I Interface Pilot TCC Main Port Parallel Port TCC Extension Port Pilot ID Setting PARALLEL SC253i SERIAL 1 SERIAL 2 PILOT ID PS2 MOUSE USB VGA PS2 KEYBOARD Power Connector Trackball Keyboard Network Port USB Port Serial Port Video Serial Port (9 Pin D sub) A serial device can be connected here. Parallel Port (25 pin Dsub) A printer or other parallel port device can connected here. TCC Main Port (62 pin Dsub) Connect TTC breakout cable here.
PAGE 14
Technical Specifications Performance Specifications SC261 Studio Computer Pentium II, 350 MHz, 256 MB RAM, 6 GB HD storage 3D/2D accelerated graphics at 1024 X 768 pixels with 16-bit color Ultra wide SCSI controller 10Base-T/100Base-T Ethernet network controller USB 1.