User Manual

Channel Displays (8)

High-resolution 128 x 64 pixel OLED displays provide track

name/number, detailed metering (from mono to 5.1 surround data),

parameter name/value currently being modiﬁed by its corresponding

rotary encoder, current automation mode and more.

Track Navigation

Scroll through tracks using the Bank buttons (in groups

of eight tracks at a time) and Nudge buttons (one track

at a time).

Touch-sensitive Rotary Encoders (8)

and Knob Select / On Keys

Offer direct control over everything from panning and gain to

editing your most powerful plug-ins and EQ – these knobs can also

be pressed to select/deselect and navigate through parameters.

Touch-sensitive Motorized Faders (8)

High quality ALPS 100mm long throw faders offer accurate and

smooth mixing - touching a fader will automatically select the

corresponding track.

Record/Automation Keys

Enable direct arming of tracks for recording and/or selection

of each track’s automation mode.

Select/Assign Keys

Select tracks and assign faders to layouts, allowing

you to bank through tracks with the remaining faders –

perfect for master fader and submix applications.

Footswitch Jack

Punch in and out of recording when footswitch is connected.

Knob Set Selector Keys

Quickly assign the rotary encoders to control plug

-ins, EQs, panning, signal routing and much more – you can

either control the same parameter across all tracks or assign

all knobs to one track for easy editing of multiple parameters

at once.

Application/Workstation Change

Lets you cycle through your applications - Workstation

Change allows you to switch between multiple workstations.

Solo/Mute/Transport Keys

These keys solo/mute tracks and serve as transport

controls when the Function Key is depressed.