User Manual
Table Of Contents
- List of Figures
- Chapter 1: Introduction
- Chapter 2: Installation and Setup
- Chapter 3: MC Color Surface Controls
- Chapter 4: Common Tasks
- Chapter 5: EuControl
- Chapter 6: Soft Keys
- Chapter 7: Using MC Color
- Appendix A: Setting the IP Address
- Appendix B: EuCon Commands
COLOR GRADING MEDIA CONTROLLER
USER GUIDE
INSTALLATION AND SETUP
16
Installation
1. If you downloaded the latest software from the web, double-click the in-
staller. Otherwise, insert the installation CD into your Macintosh.
NOTE: Be sure to eject the installation CD in your Mac if you downloaded the latest
software from the web.
2. Follow the instructions to install the software.
If prompted to download the most current version of EuControl, follow the on-
screen instructions.
EuControl will launch automatically and is running when this icon appears in
your menu bar.
Figure 2-2 Menu bar with EuControl icon
3. Shut down your Macintosh.
4. Plug one end of the AC power cord into the power adapter (Figure 2-3 left)
and the other into a power outlet.
Figure 2-3 Connecting the power adapter
5. Connect the DC output cable from the power adapter to DC In on the left side
of the rear panel (Figure 2-3 right).
6. Plug one end of the Ethernet crossover cable into the Ethernet jack (labeled
with ) on the rear panel of MC Color (Figure 2-4).
EuControl
icon
DC In 15
V
power adapter
AC power cord
DC output
cable