Product Card

EULUM DESIGN LLC 6131 • Kellers Church Road • Pipersville • PA • 18947 • USA
EULUM DESIGN LTD Unit 4 • Zone D •Chelmsford Road Ind. Est • Dunmow • CM6 1XG • UK
www.eulum.com
[e-mail]
UK: [phone]
USA: [phone]
RFM-CSB-3
1.Radiation Exposure Statement
Th
is equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This transmitter
must not be co-located or operating in conjunction with any
other antenna or transmitter.
FCC Important Notes
2. OEM Integrated Instructions
This device is intended only for OEM integrators under the following conditions:
● The antenna and transmitter must not be co-located with any other transmitter or antenna.
The module shall be only used with the integral antenna(s) that has been originally tested and
certified with this module.
● As long as the two (2) conditions above are met, further transmitter testing will not be
required. However, the OEM integrator is still responsible for testing their end-product for any
additional compliance requirements with this module installed (for example, digital device
emission, PC peripheral requirements, etc.)
● In the event that these conditions cannot be met (for example certain laptop configuration
or co-location with another transmitter), then the FCC authorization for this module in
combination with the host equipment is no longer considered valid and the FCC ID of the
module cannot be used on the final product. In these and circumstance, the OEM integrator
will be responsible for re-evaluating. The end product (including the transmitter) and obtaining
a separate FCC authorization.
● The module is limited to installation in mobile or fixed applications.
● The seperate approval is required for all other operating configurations, including portable
configurations with respect to Part 2.1093 and different antenna configurations.
● The OEM is still responsible for verifying compliance with FCC Part 15, subpart B limits for
unintentional radiators through an accredited test facility.