QUICK START GUIDE IndoorCam Mini
1 PRODUCT OVERVIEW Model：T8414 2 1 4 5 3 6 7 1 2 3 4 Lens Microphone SD card slot Status LED 5 6 7 Speaker Power input SYNC button 01
2 02 POWERING INDOORCAM
3 ADDING TO EUFY SECURITY APP 1. Download and install the eufy Security app, then sign up for an account.
2. Follow on-screen instructions to complete the setup. Status LED Blinking blue slowly Blue Description Ready for setup. Working properly. Blinking red slowly Disconnected from the Internet. Blinking red once Motion or sound detected. Red Someone is watching a live stream or recording an event. Initializing system. Purple Alternating blue and red Upgrading firmware.
4 MOUNTING INDOORCAM Select a Location The camera can be placed on a table, shelf, or can be mounted on a wall or ceiling.
Keep the camera at least 0.7 ft / 20 cm away from walls or anything that may obstruct the view. Do this to avoid infrared reflection which can have a negative impact on the night vision performance.
Ceiling Mount 1. Place the positioning card against the ceiling and then mark the points. 2. Drill holes with a 5/16” (8 mm) drill bit.
3. Insert the anchors into the holes, align the holes on the mounting plate with those in the ceiling, and fix the screws with a Phillips-head screwdriver to fasten the mounting plate to the ceiling. Ceiling. 08 Ceiling.
4.Align the grooves with the mounting plate and rotate the camera clockwise until it clicks into place.
Wall Mount To mount the camera on a wall, we recommend using a mounting bracket (not provided) as illustrated below.
5 SETTING ANGLES Open the eufy Security app, and set a default angle and a privacy angle for the camera on Camera Settings > Angle Settings. Default Angle The camera will automatically rotate to this angle when turned on and when motion tracking ends. Privacy Angle If Privacy Mode (Camera Settings > Privacy Mode) is turned on, the camera will be turned off and automatically rotates to the privacy angle you set.
6 NOTICE FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party. Company Name: POWER MOBILE LIFE, LLC Address: 10900 NE 8th St, Ste 501, Bellevue WA 98004 Telephone: 1-800-988-7973 IC Statement This device complies with Industry Canada licence-exempt RSS standard(s).
Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil nedoit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
The adapter shall be installed near the equipment and shall be easily accessible. Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment. The suitable temperature for T8414 and accessories is -20°C-45°C (-4°F - 113°F). When supplying, please place the device in an environment that has a normal room temperature and good ventilation.
requirement, use product that maintain a 20cm distance between the device and human body. Wi-Fi Operating Frequency Range: 2412~2472MHz; This product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Customer Service Warranty 12-month limited warranty Call Us United States +1 (800) 988 7973 Mon-Fri 9AM-5PM (PT) United Kingdom +44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT) Germany +49 (0) 69 9579 7960 Mon-Fri 6:00-11:00 Email Us Customer Support: support@eufylife.
19
20
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
