User Manual

36 37
2
Clean any hair or debris wrapped around the wheel or entangled inside the wheel
cavity.
3
Reinstall the wheel and push in until it clicks into place.
Do not clean the swivel wheel with water.
Clean the Mopping Cloth and Water Tank
It is recommended to clean the mopping cloth and water tank after each use.
24h
1
After each use, remove the mopping cloth from the water tank.
2
Rinse the mopping cloth and water tank thoroughly with water.
3
Air-dry the mopping cloth and water tank completely to avoid being mildewed or
producing unpleasant smell.
Replace the Rubber Strip
1
Turn over the main unit, and remove the screws.
2
Remove the cover plate and then take out the rubber strip.
1
2
3
Install the new rubber strip in place.
2
1
4
Reinstall the cover plate and fix it with screws.