User Manual

26 27
Press on RoboVac to start cleaning in Auto Mode.
• During cleaning, RoboVac will return to the Charging Base automatically
if the battery level becomes low. Once recharged, RoboVac will resume
to finish the remaining cleaning.
• By default, RoboVac starts in Auto cleaning mode when it is turned on.
Spot cleaning
You can select the Spot cleaning mode in the EufyHome app. In Spot mode, RoboVac
intensively cleans a specific area for 2 minutes in a spiral pattern. Useful if there is a
concentrated area of dust or debris.
EufyHome
Select a Suction Power Level
In the EufyHome app, select a suction power level according to your needs:
• Standard (Default)
• Max
When RoboVac starts cleaning the next time, it will clean according to the
suction power level you previously selected.
Use Mopping System
• The mopping mode is not recommended when no one is at home.
• Only use the mopping mode on a floor without carpets.
• Remove the water tank when RoboVac is under charging or not in use.
1
Before mopping, install the waterproof pad under the Charging Base to protect
the floor.
2
Wet the mopping cloth and wring it until it does not drip. Insert the cloth along
the bracket slot and stick it firmly.