User Manual

24 25
Wi-Fi Status Light
Slowly flashing blue Waiting for connection
Rapidly flashing blue Connecting with your wireless router
Solid blue Connected with your wireless router
• If you have any problems during the Wi-Fi setup process, refer to the
“Troubleshooting > Wi-Fi connection” section in this Manual.
• If RoboVac gets stuck in any space, tap Find My Robot in the app to find
the machine.
Restore Factory Settings
Press and hold
on RoboVac for 10 seconds to restore factory settings if necessary.
- You will hear a voice prompt when the settings have been reset and the Wi-Fi
status light will slowly flash blue. Now you can follow the Wi-Fi instructions in the
EufyHome app to set up the Wi-Fi connection.
Schedule Cleaning
With the EufyHome app, you can schedule RoboVac to start cleaning at a particular
time.
• You can set the time and customize the cleaning schedules from Sunday
to Saturday on the EufyHome app. This function is available in the app
only.
Start / Stop Cleaning
• Make sure the main power switch on the bottom of RoboVac is turned
on before use.
• You can also start or stop cleaning via the EufyHome app.
1
Press on RoboVac to start cleaning in Auto Mode.
2
Press again to pause cleaning.
Select a Cleaning Mode
Auto cleaning
After startup, RoboVac moves from the Charging Base and automatically determines
its cleaning route, following a bow-shaped cleaning method. When the entire clean is
finished, RoboVac automatically returns to the Charging Base.