User Manual

18 19
F. Water Tank
Washable mopping cloth
Fliter element
Cloth attachment area
Slot
Fliter element
Movable pulley
Water inlet
Snap joints Snap joints
Water inlet cover
LED Indication
You can see the status of RoboVac from the LED indicators.
(Power Status Light)
Status
Breathing orange Charging
Solid blue Standby / Cleaning / Fully charged
Solid orange Low power and returning to Charging Base
O
• RoboVac is off.
• To conserve power, the light automatically turns off
when RoboVac is not docked to the Charging Base
and has been inactive for 10 minutes.
Flashing red + Voice alert
RoboVac has an error.
Refer to the “Troubleshooting>Voice Alert” section in
this manual for solutions.
(Wi-Fi Status Light)
Status
Slowly flashing blue Waiting for connection
Rapidly flashing blue Connecting with your wireless router
Solid blue Connected to your wireless router
Using Your RoboVac
Important Tips Before Use
a
b
c
d
e
f
Remove power cords and small objects from the floor that may entangle RoboVac.
You can use the supplied cable ties to organize your wires and power cords.
Fold tasseled edges of area rugs underneath to prevent tangling RoboVac. Avoid
cleaning very dark-colored high-pile rugs or rugs thicker than 1.02 in/26 mm as
they may cause RoboVac to malfunction.
Keep RoboVac away from spaces lower than 2.87 in/73 mm to prevent RoboVac
from getting stuck. If necessary, place a physical barrier to block off the problem
areas.
Keep RoboVac away from wet areas.
RoboVac may climb on top of objects less than 0.63 in/16 mm in height. Remove
these objects if possible.