Cleaning For FAQs and more information, please visit: www.eufylife.
Table of Contents 02 Important Safety Instructions 04 About Your RoboVac What's In the Box RoboVac Anatomy 07 Using Your RoboVac Important Tips Before Use Before You Start Install the Charging Base Charge Your RoboVac Start/Stop Cleaning Select a Cleaning Mode Schedule Cleaning Use Your RoboVac with EufyHome App Use Your RoboVac with Amazon Alexa (Optional) 16 Cleaning and Maintenance Clean the Dust Collector and Filters Clean the Rolling Brush Clean the Sensors and Charging Pins Clean the Side Brushes
Important Safety Instructions To reduce the risk of injury or damage, read these safety instructions carefully and keep them at hand when setting up, using and maintaining this device. WARNING SYMBOLS USED This is the safety alert symbol. This symbol alerts you to potential hazards that could result in property damage and/or serious bodily harm or death.
About Your RoboVac RoboVac Anatomy What's In the Box Top & Side Auto cleaning On/Off button Bumper Wi-Fi status light ON OFF RoboVac 11c Charging Base Remote Control Main power switch (On / Off) Charging socket Dust collector Dust collector release button Power Adapter Cleaning Tool Side Brushes (×4) Bottom Charging contact pins Drop sensors Swivel wheel Spare HEPA-Style Filter Spare Foam Filter Owner’s Manual & Quick Start Guide Battery cover Side brushes Brush guard Rolling brush Whee
Using Your RoboVac Dust Collector Filter door Important Tips Before Use Filter cover Foam filter HEPA-style filter Filter door release button Charging Base a b d e c Status light Charging contact pins Power socket Remote Control a Remove power cords and small objects from the floor that may entangle RoboVac. 1 Start/Stop Auto cleaning b Remove rugs that are thicker than 0.4 in/10 mm as they may cause RoboVac to malfunction.
Before You Start 2. Remove objects within 3 ft/1 m of the left and right side and within 6 ft/2 m of the front of the charging base. 1. Remove the protective film covering RoboVac and the Charging Base. 3. Connect the round connector of the adapter into the power socket on the Charging Base and the other end into a wall outlet. 2. Flip RoboVac over and snap on the side brushes. T - Install the Charging Base in a location that RoboVac can easily access.
Method 2: Press on the remote control to return RoboVac to the Charging Base. Start/Stop Cleaning 1. Turn on the main power supply Press the power switch on the side of RoboVac to turn on the main power supply. ON Method 3: Charge RoboVac directly with the power adaptor. 2. Start cleaning Press RoboVac Status Light T 10 T on RoboVac or When the system is idle for 10 minutes, RoboVac switches to Standby Mode automatically to save power.
T - RoboVac will return to the Charging Base automatically when the power level becomes low. - Whenever you turn RoboVac on, it will start Auto cleaning. 4. Single Room cleaning RoboVac intensively cleans one single room and stops when cleaning is complete. Select this mode only when one specific room needs to be cleaned. Make sure to confine RoboVac to the room by closing the door. Press on the remote control to start cleaning in Single Room Mode. 2.
Schedule Cleaning With the EufyHome app, you can schedule RoboVac to start cleaning at a particular time. T - You can set the time and customize the cleaning schedules from Monday to Sunday on the EufyHome app. This function is available in the app only. - Cleaning schedules are erased when RoboVac is powered off. If RoboVac is powered on without Internet access, cleaning schedules will not synchronize and must be reset via the app.
Open the Alexa app and select “Skills” from the menu. 1 On the Skills screen, search for “EufyHome - RoboVac”. 2 3 Once you have found the “EufyHome - RoboVac” skill, tap Enable. Login with your EufyHome account so that Alexa can control your RoboVac. Say simple commands to Alexa: "Alexa, ask RoboVac to start cleaning" Press the filter door release button to open the filter door and take out the filters.
Clean the Rolling Brush Clean the Side Brushes Pull on release tabs to unlock brush guard as shown. Foreign substances, such as hair, can easily get tangled in the side brushes, and dirt may adhere to them. Be sure to clean them regularly. Lift the rolling brush to remove. Clean the rolling brush with the provided cleaning tool or a vacuum cleaner. Reinstall the rolling brush by inserting the fixed protruding end first, then clicking into place.
Troubleshooting Problem Solutions RoboVac cannot be activated. • Make sure the power switch is in the ON position. • Ensure the battery is charged. • Replace the batteries in the remote control (2 AAA batteries). • Make sure the remote control is within range (less than 3m from RoboVac). The remote control does not work. • Replace the batteries in the remote control. • Point the remote control directly at RoboVac. • Make sure RoboVac is turned on and fully charged. RoboVac stops working suddenly.
Wi-Fi Connection Before Wi-Fi setup, make sure RoboVac and your Wi-Fi network meet the following requirements. If you cannot control RoboVac with your smartphone, find the solutions below to solve the problem. If the problem persists, contact the Eufy service center for help. Cause Wi-Fi Status Light • Check if your router is connected to the Internet.
Notice The symbol on the product or its packaging indicates: Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local authority for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.
