Owner's Manual
Table Of Contents
- Quick Start Guide
- Table of Contents
- What’s Included
- Product Overview
- How The System Works
- Connecting The Homebase
- Setting Up The System
- Determining The Power Option
- Finding A Mounting Spot
- Mounting The Bracket
- Mounting The Doorbell
- Detaching The Doorbell
- Recharging The Doorbell
- Powering The Doorbell With Existing Doorbell Wires
- Notice
- Warranty
- Template
14
English
Mount the Doorbell on Surfaces Made Out of Hard
Materials
1. If you’re mounting the doorbell on a surface made out of hard materials, like brick,
concrete, stucco, drill 2 holes through the Screw Hole Positioning Card with a
15/64”(6mm) drill bit.
2. Insert the provided anchors, and then use the provided long screws to secure the
Mounting Bracket on the wall.
What is required: Power Drill, 15/64”(6 mm) Drill Bit, Mounting Bracket, 15°
Mounting Wedge (Optional), Screw Packs
Power Drill
(not provided)
15/64”(6 mm) Drill Bit
Mounting Bracket
(Attached to 15° Mounting
Wedge)
15° Mounting
Wedge (Optional)
Screw Packs (Spare screws
and anchors are included.)
1