Owner's Manual
Table Of Contents
- Quick Start Guide
- Table of Contents
- What’s Included
- Product Overview
- How The System Works
- Connecting The Homebase
- Setting Up The System
- Determining The Power Option
- Finding A Mounting Spot
- Mounting The Bracket
- Mounting The Doorbell
- Detaching The Doorbell
- Recharging The Doorbell
- Powering The Doorbell With Existing Doorbell Wires
- Notice
- Warranty
- Template
English
13
STEP 5 MOUNTING THE BRACKET
Mount the Doorbell on a Wooden Surface
If you’re mounting the doorbell on a wooden surface, you don’t need to pre-drill
pilot holes. Use the provided screws to secure the Mounting Bracket on the wall, The
Screw Hole Positioning Card indicates the position of the screw holes.
What is required: Screwdriver, Mounting Bracket, 15° Mounting Wedge (Optional),
Screw Packs
Phillips-Head Screwdriver
(not provided)
Wall
Wall
Mounting
Bracket
Mounting
Wedge
Mounting
Bracket
Mounting Bracket
(Attached to 15° Mounting
Wedge)
15° Mounting
Wedge (Optional)
Screw Packs (Spare screws
and anchors are included.)
Without 15° Mounting Wedge With 15° Mounting Wedge