SDS

文件名称
File Name
电池规格书
Battery Spec.
产品型号
Product model
18650(1INR19/66-4)
文件编号
Document No.
文件版本
Version
A2
日期
Date
2021-05-12
页码
Page
4/ 18
--- FUJI Confidential ---
14
工作温度
Operating Temperature(°C）
Charging:0℃~45℃
充电：0℃~45℃
0℃～10℃: Charge current Max0.2C; Charge
voltage 4.2V.
0℃～10℃: 最大充电电流 0.2C，充电电压 4.2V.
10℃～45℃: Charge current Max3A; Charge
voltage 4.2V.
10℃～45℃: 最大充电电流 3A，充电电压 4.2V.
Discharging: -20℃~60℃
放电：-20℃~60℃
15
存储温度
Storage Temperature(°C)
(50±10)% SOC
-5~45℃ ≤1months
-5~45℃
≤3months
-5~30℃ ≤12months
16
Guaranteed Deadline
保质期限
Guaranteed Deadline of this product is 12 months from
manufacture code
保质期限从出厂日期开始算 12 个月
4
、测试方法和定义
Test methods and definitions
4.1 测试条件 Test conditions
除非另有规定，本规格书中各项试验应在以下大气条件下进行：
Unless otherwise specified, tests in this specification should be conducted at the following atmospheric conditions:
温度：25℃±2℃；
Temperature: 25℃±2℃;
相对湿度：45~75%RH；
Relative humidity: 45~75%RH;
大气压力：86 KPa～106 KPa
Atmospheric pressure：86 KPa-106 KPa
4.2 测量仪表与设备要求 Test instruments requirements
测量电压的仪表准确度应不低于±0.5%。
The precision of voltage measuring instrument should not be lower than ±0.5%.
测量电流的仪表准确度应不低于±0.5％。
The precision of current measuring instrument should not be lower than±0.5％
测量时间用的仪表准确度应不低于±0.1％。
The precision of time measuring instrument should not be lower than ±0.1％
测量温度的仪表准确度应不低于±0.5℃。
The precision of temperature measuring instrument should not be lower than ±0.5℃
恒流源的电流可调，在恒流充电或放电过程中，其电流的相对变化应在±1% 范围内。
The current of the constant current power supply can be adjusted; the relative variation of its current should be in the
range of ±1% at constant charge or discharge
恒压源的电压可调，在恒压充电过程中，其电压变化应在±1%范围内。
The voltage of the constant current power supply can be adjusted; the relative variation of its voltage should be in the
range of ±1% at constant charge
测量重量用的仪器准确度应不低于 1％。
The precision of weight measuring instrument should not be lower than 1％