SDS

文件名称
File Name
电池规格书
Battery Spec.
产品型号
Product model
18650(1INR19/66-4)
文件编号
Document No.
文件版本
Version
A2
日期
Date
2021-05-12
页码
Page
15/ 18
--- FUJI Confidential ---
9
、环保要求
Environmental requirements.
本电池产品符合 RoHS2.0 指令要求。
This product is RoHS2.0 compliant.
10
、外观
Cosmetic requirements
10.1 用目测法检验被测电池外观，并检查电池与移动电话或模拟装置配合情况，应符合以下要求：
Visually inspect the battery appearance and check the fit between the battery and the mobile phone or simulator
device. The result should be in conformance with the following requirements.
10.2 电池表面平整、清洁、无机械损伤；喷涂效果均匀、无色差；标签内容正确、字迹清晰、无遗漏、有相关标识，五
金端子无锈蚀、镀金良好、无划伤变形。
The battery surface should be even, clean and free from mechanical damage; the spray painting effect should be even
and
no chromatic aberration
; the text on label should be correct, clear and complete. Identifications and metal
contacts should be well plated and free from rust, scratches and deformation.
10.3 电池成品表面应有必须的产品标识：含产品名称、型号、标称电压、容量、充电限制电压、执行标准编号、正负极
性、序列号、制造厂名、商标和警告语等。
the surface of battery should bear necessary product identifications. These include product name, model, nominal
voltage, capacity, maximum charge voltage, reference standard, positive and negative polarities, serial number,
manufacturer's name, trademark, warnings, etc.
10.4 封装效果良好，间隙均匀、无明显溢胶，移动电话或模拟装置配机效果良好，拆卸顺利、锁扣可靠、开机能工作正
常。
The battery is well sealed and margined, free from excess glue. The battery fits well with the mobile phone or simulator
device. The battery can be inserted and removed smoothly. The latch is reliable. Battery shall function properly when
the device is powered on.
11
、运输、贮存
Transportation and storage
11.1 运输 Transportation
电池应包装成箱进行运输，在运输过程中应防止剧烈振动、冲击或挤压，防止日晒雨淋，严禁与易燃、易爆、易腐蚀的
物品同车装运，可使用汽车、火车、轮船、飞机等交通工具进行运输。
The battery should be packaged into boxes for transportation. Excess vibration, shock, crush, direct sunlight and
drenching should be avoided in transit. The battery must not ship together with things that are flammable, explosive or
corrosive on the same vehicle. The battery can be transported on trucks, trains, ships, aircrafts or other transportation
vehicles.
11.2 贮存 Storage
电池贮存应保持原有包装，存放产品仓库环境温度为-20℃～+25℃，相对湿度 45~75%RH 清洁、干燥、通风并设有防
潮、防尘、防震、防腐蚀措施的室内，避免与腐蚀性物质接触，应远离火源及热源。
The battery should be kept in their original package and stored in a warehouse with ambient temperature in the range
between -20℃ and +25℃，and relative humidity 45~75%RH. The battery should be kept indoors in a place that is
clean, dry, ventilated and equipped with measures against moisture, dust, vibration and corrosion, and kept from
contact with corrosive substance and sources of ignition and heating.