QUICK START GUIDE Video Doorbell 1080p (Battery-Powered) Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
TABLE OF CONTENTS What’s Included Product Overview How the System Works Powering on the Wi-Fi Doorbell Chime Setting up the System Charging Your Doorbell 01 03 04 05 07 08 09 11 14 15 16 17 Finding a Mounting Spot Mounting the Bracket Mounting the Doorbell Detaching the Doorbell Recharging the Doorbell Notice
WHAT’S INCLUDED For Wi-Fi Doorbell Chime Installation For Video Doorbell Installation Video Doorbell 1080p (Battery-Powered) Mounting Bracket Screw Hole Positioning Card Model: T8222 15° Mounting Wedge (Optional) FCC ID: 2AOKB-T8220 IC: 23451-T8220 Model: Wi-Fi Doorbell Chime Power Plug FCC ID: 2AOKB-T8020 IC: 23451-T8020 QSG Note: Power plug may vary in different regions.
PRODUCT OVERVIEW HOW THE SYSTEM WORKS Video Doorbell (Battery Powered) How the System Works Front view: The video doorbell system includes 2 parts: • The video doorbell at your door 1 2 3 1. Motion Sensor 2. Microphone 4 5 3. Camera Lens 4. Ambient Light Sensor 5. Status LED 6 • The Wi-Fi Doorbell Chime in your house The video doorbell detects motion at your porch and allows you to answer the door anytime and anywhere.
STEP 1 POWERING ON THE WI-FI DOORBELL CHIME 2. Extend Wi-Fi Doorbell Chime’s antennas. Connect the HomeBase 2 to the Internet 1. Fix the power connector to Wi-Fi Doorbell Chime. ① Place the power connector over Wi-Fi Doorbell Chime in the direction the arrows indicate. ② Align the raised slots of the power connector with the notch on the base of the doorbell chime. ③ Rotate clockwise to lock the power connector in place. 1 2 3 3.
STEP 2 SETTING UP THE SYSTEM Download the App and Set up the System Download the eufy Security app from the App Store (iOS devices) or Google Play (Android devices). STEP 3 CHARGING YOUR DOORBELL The doorbell comes with an 80% battery level for safe transportation. Fully charge it before mounting the doorbell at your front door. 6 months Sign up for a eufy Security account and follow onscreen instructions to complete the setup. Tap Add Device and add the following devices: 1.
STEP 4 FINDING A MOUNTING SPOT Place the Screw Hole Positioning Card against the wall to mark the position. Find a Mounting Spot Take the Video Doorbell to your front door and check the live view on the eufy Security app at the same time. Find a position where you can get the desired field of view. Consider the below factors: 1. Check if you can reuse the existing holes and anchors on the wall or door frame. 2.
STEP 5 MOUNTING THE BRACKET Mount the Doorbell on a Wooden Surface If you’re mounting the doorbell on a wooden surface, you don’t need to pre-drill pilot holes. Use the provided screws to secure the Mounting Bracket on the wall. The Screw Hole Positioning Card indicates the position of the screw holes. What is required: Power Drill, Mounting Bracket, 15° Mounting Wedge (Optional), Screw Packs Mount the Video Doorbell on Surfaces Made Out of Hard Materials 1.
STEP 6 MOUNTING THE DOORBELL 2 Mount the Doorbell Align the doorbell with the top of the mount and then snap the bottom into place. Wall Mounting Bracket Without 15° Mounting Wedge Wall Mounting Wedge Mounting Bracket With 15° Mounting Wedge You’re all set! If you want to detach the doorbell or recharge it, please refer to the following sections.
APPENDIX 1 DETACHING THE DOORBELL Detach the Doorbell 1. Use the doorbell detaching pin provided if you wish to detach the doorbell from the Mounting Bracket. 2. Insert and press the detaching pin into the hole on the bottom of the doorbell and then lift to take the bottom of the doorbell off. APPENDIX 2 RECHARGING THE DOORBELL Recharge the Doorbell Charge the doorbell with universal USB chargers that deliver 5V 1A output.
NOTICE This product complies with the radio interference requirements of the European Community. FCC Statement Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
