Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
QUICK START GUIDE SoloCam S40
TABLE OF CONTENTS PRODUCT OVERVIEW 02 05 MOUNTING SOLOCAM CHARGING SOLOCAM 03 08 NOTICE SETTING UP SOLOCAM 04 EN 01
PRODUCT OVERVIEW 1 5 4 6 2 10 3 7 8 9 1. Solar Panel 2. Camera Lens 3. Motion Sensor 4. Photosensitive Sensor 5. Microphone 02 EN 6. LED Indicator 7. SYNC Button 8. Type-C Charging Port 9. Mounting Hole 10.
CHARGING SOLOCAM Battery-powered Charging Solid blue Fully charged Off EN 03
SETTING UP SOLOCAM Download the App and Set up the System 1. Download and install the eufy Security app, and sign up for an account. 2. Follow on-screen instructions to add your SoloCam .
MOUNTING SOLOCAM Select a Location SoloCam S40 can be mounted on a wall. Select a location where you can get the desired view. We recommend hanging it 7-10 ft (2-3 m) above the ground. Camera field of view Motion Detection Zone 7-10 ft (2 - 3 m) To maximize the solar panel efficiency, select a location where SoloCam S40 can receive more sunlight.
Mount SoloCam S40 SoloCam S40 can be mounted both outdoors and indoors. 1. Turn the knob of the mounting bracket counterclockwise to loosen and disassemble it. 2.Place the mounting bracket against the wall. Drill holes with a 15/64 inch (6 mm) drill bit, then insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco.
3. Firmly screw the knob of the mounting bracket into the mounting hole of SoloCam. 4. Hold and screw SoloCam to the mounting bracket. Rotate SoloCam to adjust the view and check it using the live stream which you can access in the eufy Security app. SoloCam S40 can be also installed on the ceiling. Follow the steps 1-4 mentioned above to install it. Tips: For troubleshooting, check Help on the eufy Security app. Refer to the app page for LED indicator status.
NOTICE FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. IC RF Statement When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements.
Customer Service Warranty 12-month limited warranty Call Us United States +1 (800) 988 7973 Mon-Fri 9AM-5PM (PT) United Kingdom +44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT) Germany +49 (0) 69 9579 7960 Mon-Fri 6:00-11:00 Email Us Customer Support: support@eufylife.
