Operation Manual

461307064 (RS-000)
6
1
2
3
4
5
6
1
1
2
3
4
5
2
A
B
C
3
4
GB DESCRIPTION OF THE APPLIANCE
GENERAL DESCRIPTION
Our electric ovens can be Multifuction ovens, with 6 or
8 diverse functions.
All models can be matched with electric ceraminc glass
hob (for details on built-in hobs please refer to the
instruction handbook provided with the hob).
Each knob on the front panel shows the scheme of the
related heating element.
To prevent the oven from overheating it has been
equipped with a safety temperature device, which
automatically turns on in case the main thermostat fails
to work. In such an event, the electricity is temporarily
cut off: do not try to fi x the failure yourself, instead
turn the appliance off and report to your local
Dealer or Service Centre.
Furthermore, the appliance is fi tted with a cooling fan
to cool the front control panel, the knobs, the oven
door handle and the electrical components.
The cooling fan can:
turns on automatically when you switch on the oven
and turns off when the appliance has switched off;
or
starts up 10 ~ 15 minutes after the oven and, in
order to accelerate cooling times, and remains
active for approximately 25 ~ 30 minutes after the
appliance has been switched off.
The oven may be equipped with guide bars, either fi xed
(fi g. 1) or telescopic (fi g. 2) which allow for housing a
number of accessories, the type and the quantity of
which may vary depending on the model (fi g. 3):
• oven shelf (fi g. A)
drip pan or drip tray (fi g. B)
baking or pizza tray (fi g. C)
spit holder + spit + forks + handle (*)
(*) optional - only certain versions or market.
Some models can be fi tted with «push push» knobs.
In order to use the oven, it is necessary to extract the
knobs: push and release on them (see fi g. 4).
During use of the oven, ensure that all the knobs
are in the external position.