Operation Manual

461307064 (RS-000)
3
GB
The appliance was designed and made in accordance with the European standards EN 60 335-1
The appliance was designed and made in accordance with the European standards EN 60 335-1
and EN 60 335-2-6 (electrical) plus relative amendments.
and EN 60 335-2-6 (electrical) plus relative amendments.
The appliance complies with the prescriptions of the European Directives as listed below:
The appliance complies with the prescriptions of the European Directives as listed below:
- 73/23 + 93/68 EC concerning electrical safety (BT).
- 73/23 + 93/68 EC concerning electrical safety (BT).
- 89/336 + 92/31 + 93/68 EC concerning electromagnetic compatibility (EMC)
- 89/336 + 92/31 + 93/68 EC concerning electromagnetic compatibility (EMC)
and reports on both its label and its packaging the symbol .
and reports on both its label and its packaging the symbol .
Oven accessories that could come into contact with foods are made with materials that comply with
Oven accessories that could come into contact with foods are made with materials that comply with
the provisions of the 89/109 EC directive dated 21/12/88.
the provisions of the 89/109 EC directive dated 21/12/88.
This product complies with EU Directive 2002/96/EC.
The crossed-out dustbin symbol reported on the appliance indicates that the appliance must be
disposed of separately from other domestic refuse at the end of its useful life. It must therefore be
delivered to a waste recycling centre specifi cally for electric and electronic equipment or returned to
the retailer at the moment of purchase of a new equivalent appliance.
The user is responsible for delivering the appliance to the appropriate collection centre at the end
of its useful life, Failure to do so may result in a fi ne, as provided for by laws governing waste
disposal.
Differential collection of waste products for eventual recycling, treatment and environmentally
friendly disposal helps reduce possible negative effects on the environment and health, and also
enables the materials making up the product to be recycled.
For more detailed information on the available refuse collection systems, refer to the local Municipal
Solid Waste disposal centre or the shop where the product was purchased.
Producers and importers are responsible for fulfi lling their obligations as regards recycling, treatment
and environmentally friendly disposal by directly or indirectly participating in the collection system.
CONTENTS
ASSISTANCE AND SPARE PARTS 4
IMPORTANT NOTES AND PRECAUTIONS 5
DESCRIPTION OF THE APPLIANCE 6-11
INSTRUCTIONS FOR THE USER 12-18
TROUBLESHOOTING 19
TECHNICAL FEATURES 19
INSTRUCTIONS FOR THE INSTALLER 20-22