Manualshelf

Operation Manual

ManualsBrandsEudora ManualsDomesticBO1060 ALCD
31323334353637383940
461307055 (A-000)
15
GB
USING THE MULTIFUNCTION OVEN
Three different operating modes may be selected for this electric oven:
1. BASIC OPERATION WITH NO PROGRAMME
The oven may be used with no programme, and cooking is started and stopped (switching on and off)
manually.
• Select the required function with the programme selector knob (A).
• If necessary, use knob (B) to set the cooking temperature in programmes not
using the grill (2, 3, 4, 5, 6, 7, and 11) or the percentage grill power in grill
programmes (8, 9, and 10).
• Press to start the function, a beeper sounds to confi rm.
• The symbol lights up, indicating that the programme is in progress.
• At the end of cooking, turn the oven off by turning the programme selector
knob to STOP. A beeper sounds to confi rm that the oven is off.
2. OPERATION WITH PROGRAMMED COOKING TIME
The oven may be used with programmed cooking times. In this case, cooking is started manually but stopped
automatically.
• Select the required function with the programme selector knob (A).
• If necessary, use the knob (B) to adjust the cooking temperature in programmes
not using the grill (2, 3, 4, 5, 6, 7, and 11) or the percentage grill power in
programmes with the grill (8, 9, and 10).
• Press the button . The fi gure “0” fl ashes on the display.
• Set the time with the and/or buttons (max 199) within 5 seconds,
after which the fi gure is no longer displayed.
• Press the button again to confi rm. The cooking time value now stops
fl ashing. Alternatively, after 5 seconds the fi gure stops fl ashing automatically and
the previous setting is automatically reselected.
• Press the button to enable the function. A beeper sounds to confi rm.
• The symbol lights up indicating that the oven is on. The END OF COOKING
TIME is displayed, calculated by adding the CURRENT TIME + COOKING TIME
setting and a countdown timer starts.
• Once the set time has elapsed, the oven is switched off automatically, a beeper
sounds and the symbol is displayed. Remember to turn the programme
selector knob (A) back to the STOP position.
INSTRUCTIONS FOR THE USER