Operation Manual

461307055 (A-000)

PROGRAMME SELECTOR KNOB (ref. A)

• Turn knob clockwise or anticlockwise to select the required programme, which is instantaneously shown on

the display.

• Turning the selector knob to STOP while a programme is in progress arrests the programme immediately.

• The selected function cannot be changed while a programme is in progress. To change function, turn knob to

STOP and select a new programme.

THERMOSTAT or PERCENTAGE GRILL POWER SETTING KNOB (ref. B)

• Use to set the required cooking temperature for programmes not using the grill (2, 3, 4, 5, 6, 7 and 11) or to

set percentage grill power in grill programmes (8, 9 and 10).

• When any cooking or grilling function is selected, a preset value appears on the display, depending on the

programme. Turn the knob clockwise or anticlockwise to increase or decrease this value.

• The maximum settable temperature varies from programme to programme, whereas the maximum grill

setting possible is always 100%.

• The minimum settable temperature is always 50°C, whereas the minimum grill setting is always 10%.

DISPLAY

With the programme selector knob (A) in the STOP position, the display

only shows the time and only the TIMER, OVEN LIGHT and LOCK CONTROLS

buttons may be used.

With the programme selector knob (A) in any position other than STOP, the

display shows the time and the symbol for the selected programme.

In programmes with no grill function, the values for TEMPERATURE SETTING

and OVEN AIR TEMPERATURE are also displayed, which vary while the oven is

operating.

In programmes with grill function, the value for PERCENTAGE GRILL POWER

is displayed instead.

POWER CUTS

After a brief power cut (approximately 4 minutes), the oven resumes all set functions normally.

After a longer power cut, the cooking function must be reselected and any user deﬁ ned programmes and the

correct time must be set again.

INSTRUCTIONS FOR THE USER