Manualshelf

Operation Manual

ManualsBrandsEudora ManualsDomesticBO1060 ALCD
21222324252627282930
461307055 (A-000)
8
GB
ON BUTTON
This is active in all positions except when the programme selector knob (A) is in the STOP position. Press to
activate all programmes. The relative symbol appears on the display once confi rmed .
This button is inactive once the programme has started or has completed. To reset, turn the programme selector
knob (A) to STOP for 1 second and select a new programme.
STOP COOKING BUTTON
Not active when programme selector knob (A) is in STOP position.
Activated only after setting the cooking time with the relative button .
Pressing the button sequentially cycles through the following: fl ashing hours, fl ashing minutes, no values fl ashing.
The fl ashing value may now be adjusted by pressing and/or .
COOKING TIME BUTTON
Not active when programme selector knob (A) is in STOP position.
Press once to select (fl ashing value) the cooking time, press again to deactivate. While the value is fl ashing, the
cooking time may be adjusted with the and/or buttons.
CLOCK + TIMER BUTTON
Active even when programme selector knob (A) is in STOP position.
Press and hold for 2 seconds to select SET CLOCK mode. This function is described later.
Pressing the button briefl y selects TIMER mode, described later.
OVEN LIGHT BUTTON
Active even when programme selector knob (A) is in STOP position.
Press to turn the light on and off. Press and hold while using the and/or buttons to regulate the
display contrast.
CONTROL LOCK BUTTON
Active even when programme selector knob (A) is in STOP position.
Press and hold for 3 seconds to enable LOCK CONTROLS function. The relative symbol is shown on the
display and all CONTROL KNOBS and PROGRAMMING BUTTONS are disabled. Press and hold again to exit
LOCK CONTROLS mode.
INCREASE TIME SETTING BUTTON
Increases the fl ashing value on the display. Press and hold for approximately 1.5 seconds to increase value more
rapidly. Press together with the button to regulate display contrast.
DECREASE TIME SETTING BUTTON
Decreases the fl ashing value on the display. Press and hold for approximately 1.5 seconds to decrease value more
rapidly. Press together with the button, to regulate display contrast.
INSTRUCTIONS FOR THE USER