Specifications

ManualsBrandsEuControls ManualsElectrical EquipmentDimmer

Specifications subject to change without notice

EuControlContact:Info@EuControls.comlLosAngeles,CA90248l8885359580

U.S. Patent Pending

BluetoothWireless

S830‐PL‐DBT

PIR+Light+Photo+Temp

BluetoothmeshPIR,Photo&LightingControl

ON/OFF&0‐10VDimming

1. UL 916 Listed

2. FCC ID: 2AJ2N-S830-PL-DZB, FCC Class B.

3. Bluetooth mesh compatible

4. Mount 1/2 Inch Trade Size Knockout, Dust Proof Design IP50

Part Numbers

●

Bluetooth mesh Wireless Control of Luminaries

●

Bluetooth mesh Occupancy Sensor, & Photo Sensor

●

2.4GHz, +10dBm Bluetooth transmit power

●

0-10V Analog Dimming Control, 50mA Sink

●

Compatible with Electronic Ballasts & LED Drivers that comply

with IEC60929 Annex E2, 0-10V Dimming.

●

Best when used with Dim to Zero (Dim to OFF) Ballasts & LED

Drivers

Safety and Compliance

Product Features

Part Number

Dimming

US & CN

Class 2

Control

ON/

OFF

Control

Dimming

0-10V

Analog

Photo

Sensor

PIR

Occupancy

Sensor

S830-PL-DBT YES Bluetooth

YES via

Dim

YES YES YES

S830-DBT YES Bluetooth

YES via

Dim

YES NO NO

1. Operating temperature: 0 to +60°C

2. Storage temperature range: -10C to +70°C

3. Humidity (non-condensing): 5% - 95%RH

4. Cooling: Convection

5. Vibration Frequency: 5-55Hz/2g, 30 minutes

6. Impact resistance: 1g/s

Environmental

Electrical Specifications at 25

●

Input: UL Class 2 DC voltage 12VDC (10 to 14VDC)

●

Input Current Draw: 60mA, 200mA Peak during transmit.

●

0-10V Dimming intended for use with Dim to Zero/Dim to OFF Ballasts and LED

Drivers.

Typical Application Circuit

AUX Common

AC Line (BLACK)

AUX +12VDC

Dimming LED Driver or

Dimming Ballast

(0-10V)

AC Neutral (WHITE)

GRAY or PINK (0-10V) Analog Dim– Control

VIOLET (0-10V) Analog Dim+ Control

S830

12VDC UL Class

2 Power Source

S830 12VDC GND

S830 +12VDC

S830 DIM-

S830 DIM+

S830-ACC-CNR1M

Accessory 1M Cable

IP50

E513483

S830-DBT

S830-PL-DBT

FCC ID 2AJ2N-S830-PL-DBT: Channel 0 to 39

See warnings on page 4.

Summary of content (4 pages)

PAGE 1
ON/OFF & 0‐10V Dimming Product Features ● ● ● ● ● ● Environmental Bluetooth mesh Wireless Control of Luminaries Bluetooth mesh Occupancy Sensor, & Photo Sensor 2.4GHz, +10dBm Bluetooth transmit power 0-10V Analog Dimming Control, 50mA Sink Compatible with Electronic Ballasts & LED Drivers that comply with IEC60929 Annex E2, 0-10V Dimming. Best when used with Dim to Zero (Dim to OFF) Ballasts & LED Drivers 1. Operating temperature: 0 to +60°C 2. Storage temperature range: -10C to +70°C 3.
PAGE 2
ON/OFF & 0‐10V Dimming Bluetooth Wireless S830‐PL‐DBT PIR + Light + Photo + Temp Bluetooth mesh PIR, Photo & Lighting Control FCC ID 2AJ2N-S830-PL-DBT: Channel 0 to 39 See warnings on page 4. Mechanical Dimensions: Inches [mm] Labeling Example Material: 5VA PC Plastic Case Weight: TBD Grams (TBD oz.) Typical Notes: RED Occupancy LED Visible through PIR Lens. BLUE Bluetooth LED Visible through PIR Lens.
PAGE 3
ON/OFF & 0‐10V Dimming Bluetooth Wireless S830‐PL‐DBT PIR + Light + Photo + Temp Bluetooth mesh PIR, Photo & Lighting Control Input Specifications Parameter Min. Typ. Max. 10 12 14 Input Voltage Notes/Conditions V DC, UL Class 2 Power Source Input Current —— 60mA 200mA Peak Bluetooth Control Transmit Power —— —— +10dBm Bluetooth Control Receive —— -95dBm —— Bluetooth Radio Receive Sensitivity 1 —— 300fc Precision Optical Filtering Matches the Human Eye Min. Typ. Max.
PAGE 4
ON/OFF & 0‐10V Dimming Bluetooth Wireless S830‐PL‐DBT PIR + Light + Photo + Temp Bluetooth mesh PIR, Photo & Lighting Control Standard Lens Coverage FCC ID 2AJ2N-S830-PL-DBT: Channel 0 to 39 Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.