System Manual Mobile Hand-Held Terminal MHT-G2 More than safety.
System Manual Mobile Hand-Held Terminal MHT-G2 Inhalt Correct use 3 Exclusion of liability and warranty 3 General safety instructions 3 Structure 3 System components Delivery of the individual system components 4 5 Setup Insert the battery Insert the SD-memory card Installation of the Transponder Coding CE software Attach the read head 6 6 6 6 6 The program surface of Transponder Coding CE (TCCE) Structure of the menu 7 8 Configuration of Transponder Coding Choose the language Read/write setti
System Manual Mobile Hand-Held Terminal MHT-G2 Correct use The mobile hand-held terminal MHT-G2 enables the user to read and write data carriers of the EUCHNER system families CIS and EKS from any location. It is based on the hand-held-computer PSION WORKABOUT PRO generation 2. Please observe the notes for its correct use in the operating instructions given by the manufacturer. Exclusion of liability and warranty If the a. m.
System Manual Mobile Hand-Held Terminal MHT-G2 System components The following illustration shows all available system components of the MHT-G2. Overview table Pos. Description 1a Mobile hand-held terminal, basic unit 1b Touch-Pen 1c Cover for battery box 2 Battery 3 SD-memory card with software Transponder Coding CE (TCCE) Order No.
System Manual Mobile Hand-Held Terminal MHT-G2 Check whether all parts are complete. The individual system components have to be ordered separately. In order to obtain a functional basic system, at least the following components are required: Mobile hand-held terminal basic unit (Pos. 1) Battery (Pos. 2) Read/write head (Pos. 6) Docking station (Pos. 4) SD-storage card with software (Pos. 3) Delivery of the individual system components Mobile hand-held basic device MHT-G2-BU (Order No.
System Manual Mobile Hand-Held Terminal MHT-G2 Setup Insert the battery Recharge the battery completely before power-on. Please see the operating instructions of the system manufacturer as to how to charge the battery. Insert the SD-memory card The Transponder Coding CE (TCCE) software for reading and writing of EUCHNER Data carriers is delivered on a SD-memory card. As to how to insert the SD-memory card, please see the operating instructions of the system manufacturer.
System Manual Mobile Hand-Held Terminal MHT-G2 The program surface of Transponder Coding CE (TCCE) Double click on the symbol TCCE. The following window appears: Legend: The buttons to start/abort the read/write process. Optional button for the selection of the notation mode. ASCII: the data content of each byte is displayed as ASCII character. hex: the data content of each byte is displayed in hexadecimal notation Editing area: Here, each byte is displayed in a separate field.
System Manual Mobile Hand-Held Terminal MHT-G2 Structure of the menu Menu File Command Open Serves for opening the previously-stored data carrier contents. Command Save and Save as ... Is for storing data carrier contents. The read data are stored in the form of a special XML document. To realize this, a separate XML-tag for certain transponder data as well as for each single byte is filled with the contents. Command Close Closes the application.
System Manual Mobile Hand-Held Terminal MHT-G2 Configuration of Transponder Coding Choose the language For choosing another language, proceed as follows: 1. In the menu Options, select the command Language. . Choose the language. Read/write settings 1. In the menu Options, select the command Configuration. The window Configuration opens. Legend: COM Port: Select the setting for your read/write head. Usually, this is COM 8 Transponder: Select the Transponder type that shall be read.
System Manual Mobile Hand-Held Terminal MHT-G2 Reading and writing data carriers Reading the data carriers 1. Open the TCCE software. . Click on Read. The window Read data from transponder appears. 3. If required, define the start byte from which shall be read and the number of bytes to be read. If you do not change anything at this stage, the complete memory area of the data carrier is read. 4. Hold the read/write head with the active face directly at the data carrier.
System Manual Mobile Hand-Held Terminal MHT-G2 Control and maintenance Maintenance work is not required. Repairs at the device must only be carried out by the manufacturer! Service Important! When contacting our service department, please make sure to have the following pieces of information at hand: - Customer number or job account number - This manual - The device and accessories, if needed - The software version on your device (Menu ?, select command Over.) Service provided by: EUCHNER GmbH + Co.
Euchner GmbH + Co. KG Kohlhammerstraße 16 D-70771 Leinfelden-Echterdingen info@euchner.de www.euchner.de Issue: 103702-01-07/08 Title: System Manual Mobile Hand-Held Terminal MHT-G2 Copyright: © EUCHNER GmbH + Co. KG, 07/2008 Subject to technical modifications, all data supplied without liability. Microsoft Windows® is a registered trademark of Microsoft Corporation More than safety.
