User Manual

EUCHNER Hand-Held Pendant Station
092491-07-01/09 Subject to technical modifications Page 26 / 34
10.2.3 Text attributes
Items of text with various attributes can be output using the related command bytes. The
attributes set remain valid until a reset.
Command
byte
Description Parameters
40H
Inverse on: all subsequent characters are output inverse
41H
Inverse off: all subsequent characters are output
normally
42H
Flashing on: all subsequent characters are output
flashing
43H
Flashing off
50H
Selection "small font"
51H
Selection "large font"
Example:
Inverse and flashing output of text "Euchner" with large font at the current position of the
cursor. Then flashing and inverse off again.
Control
system
STX 6CH 51H 40H 42H A5H D5H C3H C8H CEH C5H D2H 41H 43H ETX BCC
HBAS DLE DLE
Explanation on the font size:
The character set can be displayed in 2 different font sizes. Characters can be displayed
in both font sizes at the same time.
When the font size is changed, the cursor is automatically set to the start of the display.
Small font: The display is divided into 8 lines and 16 characters. The individual
characters comprise 8x8 pixels.
Large font: The display is divided into 4 lines and 8 characters. The individual
characters comprise 16x16 pixels and are thus twice the size of the
small font.