User guide

System Manual Safety System CES-A-C5...
16
8
3
5
7
4
21
6
Pin assignment safety switches CES-A-C5...
LED indicators
STATE LED green Normal operation
Flashing Teach-in operation (for further signal function
see status table)
OUT/ERROR LED yellow Valid actuator detected
LED red - Internal electronics fault
- Invalid teach-in operation
(see status table)
Reset
In case of an operating fault, the evaluation unit can be reset to the operating state
by interrupting the power supply for approx. 10 seconds.
1  0 V 5  OUT
2  + UB 6  + LA
3
 LA 7  -LAB
4
 LB 8  +LB
View of connection side of the device
The screen on the connection cable is con-
nected internally to the device screen bond-
ing clamp via the knurled nut on the M12
plug connector.