Safety Monitor for 2 AS-i circuits

78
Subject to reasonable modifications due to technical advances Id.-No.: 103336 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. [phone] • Fax. [phone]
AS-i Safety Monitor for 2 AS-i circuits
Operation in advanced display mode
9.6 DISPLAY CONTRAST (set display contrast)
Main Menu || DISPLAY CONTRAST ||
This function allows you to set the display contrast.
• Use the arrow keys to select the line with the bar
• Confirm your selection with OK (bar flashes)
• Use the arrow keys to set the display contrast
• Use OK to apply the setting
The factory settings are invoked from the DEFAULT field.
If the contrast is set so that the display can no longer be read, it can be reset to
the factory default setting as follows:
• Shut the unit off
• Press the MODE and SET keys and hold them down.
• Shut the unit on.
DISPLAY CONTRAST
DEFAULT
__________________